7
8
1886
1886
Installing the Blades
Repeat x5
x15
bag
Blade Screw
x15
bag
Grommet
Note: The screw was installed for shipping purposes only.
Preparing the Light Fixture
Remove the pre-installed fixture screws and red
flag from the light kit assembly.
Save the screw.
It will be needed for light kit installation.
Follow these steps to prepare the light fixture for installation.
Red Flag
KEEP
x2
Fixture Screw
Carefully remove the light fixture from
the light fixture hood
Put the grommets found in the hardware bag
onto the blade screws found in the hardware
bag. Then install the blade screws to secure each
blade to the fan.
Ceiling Bracket
Downrod
Hanging Fan
Wiring
Canopy
Blades
Light
Glass
Remote Cradle
Remote
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the
hardware bag.
Fit
th
e c
an
op
y in
pla
ce as s
hown.
bag
Canopy Screw
