15
45003-01 • 07/02/2009 • Hunter Fan Company
9 • Operating and Cleaning Your Ceiling Fan
Normal Operation:
The heater
must be turned off.
Heater Function:
make sure the
ceiling fan is turned off
AUTO RESUME FEATURE
This fan contains a receiver with
an auto resume feature. The
receiver remembers the intensity
of the light, speed and direction of
the fan, and whether the heater is
on or off. When power is restored
to the receiver, the fan, light, and
heater will be at the previous
settings.
Fan Operation:
To start the fan, press the speed button on the remote at
the level you desire:
• 3 for high
• 2 for medium
• 1 for low
To turn off the fan, press the “0” button on the remote.
Light Operation:
The light button is used to turn on, dim, and turn off
the light.
To Turn the light on:
• Press the light button 1 time and the light will come on to
the previously set level.
To dim the light:
• Press and hold the light button until the light has reached
the desired level. (As you hold the button, the light level
will move throughout its entire range within 16 seconds.)
Release the button at the desired level.
To Turn the light off:
• Press the light button 1 time for gradual off and the light
will dim automatically for approximately 20 seconds until
all the way off to allow for safe exit from the room.
• Press the light button 2 times or 1 time while the light is
dimming for instant off.
Heater Operation:
The heater button is used to turn on, and off the
heater.
• Press the heater button 1 time to turn the heater on.
• Press the heater button again to turn the heater off.
Note: To assure the maximum benefit of the heater function.
Regardless of the speed setting on the fan, when the ceiling fan is
operating and the heater function is turned ON, the ceiling fan
automatically switches to low-speed updraft only and will not
accept any commands from the remote until the heater is turned
off.
Steps 9-1 – 9-2
Fan High
Fan Low
Fan
Medium
Heater
Light
Fan Off
Reversing
Switch
