Hunter 44360 Set & $ave, Инструкция по установке и эксплуатации

Страница: 19 / 56

1
ATTACHING THE THERMOSTAT
Lift the thermostat cover and set the
SYSTEM
switch to
OFF
and
the
FAN
switch to
AUTO
.
1. Fan option - Locate the
HE/HG
switch on the back of the
thermostat. Set the switch to
HG
(default) for gas furnace
and oil burners. Set the switch to
HE
for electric furnaces.
(The
switch has no effect when the system is set to cooling mode.)
2. Recovery - Locate the
Auto Recovery
switch on the back of
the thermostat. If you wish to use the Energy Star compliant
Auto Recovery feature, verify that the switch is in the ENABLE
position. If you do not wish to use this feature, simply change
the switch to the DISABLE position. See pages 44-45 for more
information.
3. System type - Locate the
System Type
switch on the
back of the thermostat. Select either STD (Standard) or HP
(Heat Pump) to match your system.
installing the thermostat, cont.