background image

12

Hunter Fan Company 

41897-01 • 11/22/05

13

41897-01 • 11/22/05 

Hunter Fan Company

9 • Operating and Cleaning Your Ceiling Fan

In warm weather

, use 

downward air fl ow pattern

In cold weather

, use upward 

air fl ow pattern

9-1.   Turn on electrical power to the fan.
9-2.    e fan pull chain controls power to the fan.  e pull chain has 

four settings in sequence: High, Medium, Low and Off .

•  Pull the chain slowly to change settings.
•  Release slowly to prevent the chain from recoiling into the 

blades.

•   e chain uses a breakaway connector that separates if the 

chain is jerked. If this happens, simply reinsert the chain into 
the connector.

9-3.    e light pull chain controls power to the light.  e pull chain has 

two settings: On and Off .

9-4.   Ceiling fans work best by blowing air downward 

(counterclockwise blade rotation) in warm weather to cool the 
room with a direct breeze. In winter, having the fan draw air 
upward (clockwise blade rotation) will distribute the warmer air 
trapped at the ceiling around the room without causing a draft. 

9-5.   For cleaning fi nishes, use a soft brush or lint-free cloth to prevent 

scratching. A vacuum cleaner brush nozzle can remove heavier 
dust. Remove surface smudges or accumulated dirt and dust 
using a mild detergent and a slightly dampened cloth. You may 
use an artistic agent, but never abrasive cleaning agents as they 
will damage the fi nish.

9-6.   Clean wood fi nish blades with a furniture polishing cloth. 

Occasionally, apply a light coat of furniture polish for added 
protection and beauty. Clean painted and high-gloss blades in the 
same manner as the fan fi nish.

To Change Airfl ow Direction

Turn the fan off  and let it come to a complete 
stop. Press the reversing switch on the fan.  (You 
will need to remove the light kit glass to do so.) 
Restart fan.

Содержание 41897-01














Отзывы: