Hunter 28198 Скачать руководство пользователя страница 10

41857-01  02/22/2005

© 2005 Hunter Fan Company

10

operating your ceiling fan

1.

Turn on electrical power to the fan.

2.

Ceiling fans work best by blowing air downward (counterclock-
wise blade rotation) in warm weather to cool the room with a
direct breeze. In winter, having the fan draw air upward (clock-
wise blade rotation) will distribute the warmer air trapped at
the ceiling around the room without causing a draft.  Refer to
Figure 31.

Figure 31 - Air flow patterns

operating the remote control

The hand-held transmitter has individual buttons for control of the
light, for controlling the fan speeds, for turning the fan off, and for
reversing. See Figure 32.
The fan may be started by pressing the HIGH, MEDIUM, or LOW
speed buttons.  For best operation, allow the fan to start on HIGH,
then select the desired speed.  Press the fan OFF button to turn the
ceiling fan off.  Press the REVERSE button to change the fan’s direc-
tion while the fan is running.
NOTE:  Replace 12-volt battery with type 23 A, MN-21 or equiva-
lent.

Figure 32 - Remote operation

mounting the remote holder

A holder is supplied with the transmitter which can be mounted to
a existing toggle switch wall plate. The holder will help prevent mis-
placement of your transmitter by providing a permanent recep-
tacle. See Figure 33.
If desired, the holder can be mounted to a convenient location on
a wall.

Figure 33 - Remote holder assembly

Reverse

Fan High

Fan Medium

Fan Low

Fan Off

Содержание 28198












Отзывы: