15
42857-01 • 02/24/11 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Uninstalling the Light Fixture
7-14 . To uninstall the light fixture, first disconnect the plug connectors
between the black wire and the black/white wire .
7-15 . Disconnect the plug connectors between the two white wires .
7-16 . Remove the two screws attaching the light kit to the lower
switch housing .
7-17 . Remove the light fixture from the lower switch housing, pulling
disconnected wires through the hole in the center of the lower
switch housing .
Note:
When removing the wires, pull the thin plug connector
(male) through first, and then pull the other plug connector
(female) through the hole .
7-18 . Install the dummy terminals (included in the sack parts) on the
two disconnected wires in the lower switch housing .
7-19 . Install the switch housing cap and plug button to the lower
switch housing .
7-20 . Once you have uninstalled the light fixture, continue
with step 7-6 .
Male Dummy
Terminal
Female Dummy
Terminal
Step 7-19
Cap
Plug Button
Step 7-17
Lower Switch
Housing
Screw
