1
2
Assembly Steps
•
Your new vehicle requires adult assembly.
Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
•
Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
•
Assembly tool for need: screwdriver(not included),pliers(not included) and spanner.
Ø5
washer
Ø5 washer
Ø5 washer
M5x14 machine screw
M5x14 machine
screw
Ø5 locknut
Ø5 locknut
Front alxe
support
Front alxe
plate
Front alxe
plate
Rear axle
●
Turn the vehicle body upside down.
●
Remove all the parts from the front axle
plate.
●
Fit a Ø5 washer against the front axle
support.
●
Fit the front axle plate against the front axle
support.
●
Fit a Ø5 washer against the front axle plate.
●
Insert the M5x14 machine screw through
the Ø5 washer, the front axle,Ø5 washer plate
and out through the front axle support, fit and
hold a Ø5 washer against the front axle
support, then fit a Ø5 locknut to the end of the
screw.
●
While holding the locknut with the pliers,
tighten the screw with a screwdriver.
●
Repeat for the other side.
●
Remove all the parts from the rear
axle.
●
Insert the real axle through the hole in
the rear of the vehicle body.
-5-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
