Hunter Products HUN9953, Руководство пользователя с инструкциями по сборке

Страница: 15 / 17

Problem Possible Cause Solution
Vehicle does not run
Vehicle does not run
very long
Vehicle runs sluggishly
Vehicle needs a push to
go forward
Difficult shifting from
forward to reverse or
vice-versa
Loud grinding or clicking
noises coming from
motor or gear box
Battery low on power
Thermal fuse has tripped
Battery connector or wires are
loose
Battery is dead
Electrical system is damaged
Motor is damaged
Vehicle still connected to
charger
Battery is under charged
Battery is old
Battery is old
Vehicle is overload
Vehicle is being used in harsh
conditions
Poor contact of wires or
connectors
“Dead Spot” on motor
Motor or gears are damaged
Battery low on power
Recharge battery.
Reset fuse, see <Fuse>
Disconnect charger from vehicle before operating.
Check that the battery connectors are firmly plugged into each
other. If wires are loose around the motor from your distributor
please to Hunter Products -
enquiries@hunterproducts.com.au
Check that the battery connectors are firmly plugged into each
other. If wires are loose around the motor, from your distributor
please to Hunter Products - enquiries@hunterproducts.com.au
A dead spot means the electric power is not being delivered to the
terminal connection and the vehicle needs repair. From your
distributor please to Hunter Products -
enquiries@hunterproducts.com.au
Attempting to shift while the
vehicle is motion
Completely stop the vehicle and shift, see <Use Your
Ride-On>
Check that the battery connectors are firmly plugged
into each other when recharging
Replace battery,
from your distributor please to
Hunter Products - enquiries@hunterproducts.com.au
Replace battery, from your distributor please to Hunter
Products - enquiries@hunterproducts.com.au
Replace battery, from your distributor please to Hunter
Products - enquiries@hunterproducts.com.au
Reduce weight on vehicle. Maximum user weight is 30kg.
Avoid using vehicle in harsh conditions, see <Safety>.
Recharge battery, from your distributor please to Hunter
Products - enquiries@hunterproducts.com.au
From your distributor please to Hunter Products -
enquiries@hunterproducts.com.au
From your distributor please to Hunter Products -
enquiries@hunterproducts.com.au
From your distributor please to Hunter Products -
enquiries@hunterproducts.com.au
From your distributor please to Hunter Products -
enquiries@hunterproducts.com.au
Battery will not
recharge
Charger feels warm
when recharging
Battery connector or adapter
connector is loose
Charger not plugged in
Charger is not working
This is normal and not a
cause for concern
Check that the battery connectors are firmly plugged into
each other.
Check that the battery charger is plugged into a working
wall outlet.
Completely read through this manual and the troubleshooting guide table before calling. If you
still need help resolving the problem From your distributor please to Hunter Products -
enquiries@hunterproducts.com.au .
14. Troubleshooting Guide