manualshive.com logo in svg

Hunter Marine H36, Руководство оператора

Операторский мануал Hunter Marine H36 - необходимый инструмент для управления вашей лодкой. Можно без проблем скачать мануал совершенно бесплатно с manualshive.com. Этот руководство поможет вам максимально эффективно использовать все возможности и функции вашего судна.

Поделиться
Скачать
background image

Hunter 36 • Maintenance

14.4

ish out the stainless finish for a mirror shine.
• Do...Rinse thoroughly with fresh water after each cruise.
Thorough rinsing can prevent a lot of the surface staining
that stainless steel produces when left in contact with salt
water residue.
• Do...Dry after each use to prevent mineral deposits from
building up on the surface of the finish.
• Don’t...Scour the stainless. Scouring can damage the
original finish.
• Most  brands  of  cleansers  contain  chemical  additives 
which will affect the original high polish finish if left on the
stainless.
• Don’t...Use a steel wool pad to clean your stainless. If 
a more abrasive product is needed, use a stainless pol-
ishing paste being sure to rub in the paste with a clean 
rag. Steel wool pads have a tendency to break apart and
small particles of steel can become embedded in the sur-
face and will rust and will give the appearance that the 
stainless itself is rusting.
Following these recommendations for the care and clean-
ing of your stainless steel will help insure that it will pro-
vide you with many years of service.

Chlorides

Today, chlorides are found in almost all soaps, deter-
gents, bleaches and cleansers; chlorides can be aggres-
sive to stainless steel. However, chlorides are very water 
soluble. Therefore, THOROUGH RINSING of your bright
work after each use will help to keep your stainless look-
ing bright and shiny.

Scratches

Like many metallic surfaces, your stainless steel will
scratch. These are merely usage scratches and over time
will blend into the overall finish.  Surface scratches can
be polished out with a polishing paste but this can be a 
lengthy and work intense process.

14.2.6  Deck Hatches

Wax the rubber gaskets on all deck hatches with a car-
nauba wax to ensure gasket material  does not stick to
Plexiglass.

14.2.7  Acrylic and Plexiglass

Important:  Do not use glass cleaning sprays, scouring
compounds, or solvents (such as acetone, gasoline, or 
thinners) to clean acrylic or Plexiglass.

Following are guidelines for cleaning acrylic and Plexiglass

parts:

*  Wash acrylic hatches, windows, and any other acrylic 
compounds with mild soap and plenty  of lukewarm 
water.

*  Use a clean, soft cloth.

*  Apply only a light pressure when cleaning.

*  Rinse with clear water, and blot dry with a damp cloth
or chamois.

14.2.8  Windows

The window frames on your boat are made of high qual-
ity aluminum with an enamel paint surface.  The frames
need no maintenance other than cleaning with soap and 
water.  Do not use abrasive or strong chemicals.  These 
may damage the finish and allow corrosion to start. 

 

Frames should be protected with marine wax. 

The  glass in the frames is tempered safety  glass and 
requires only normal cleaning.

The side windows and deck hatches are made of acrylic 
plastic.  Refer to instructions for cleaning acrylic and 
Plexiglass.

14.2.9  Caulking

All deck fitting, bow rails, windows, hatches, etc, have 
been caulked with the highest quality material to ensure 
a waterproof joint with the boat.  However, normal use will 
flex the joint and eventually break down the seal.

Note:  We recommend that al deck fittings, hatches, windows, 
rail, etc. be caulked periodically to prevent damaging leaks from 
developing.

14.2.10  Bottom Paint

We recommend an annual cleaning, sanding, and appli-
cation of anti-fouling paint.  Some owners may have 
problems with paint failure because of unusually deep 
penetration of the parting compound used in molding the 
hull.  This condition is unpredictable and is not covered by
warranty.  Usually cleaning and light sanding is all that is 
needed before recoating with a quality anti-fouling paint.  
Check with your boat dealer for recommendations about 
the specific paint to be used in your area.

Important:  Do not paint the zinc anodes (connected to the 

Содержание H36

































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для H36

SAFEQUIP Inflatable Sleds Operation & Maintenance Manual preview
Inflatable Sleds
Бренд: SAFEQUIP Страницы: 4
Corsiva Yachting 505 NEW AGE Owner'S Manual preview
505 NEW AGE
Бренд: Corsiva Yachting Страницы: 31
Four winns Fling Owner'S Manual preview
Fling
Бренд: Four winns Страницы: 79
Bavaria 36 2003 Information & Operation Manual preview
36 2003
Бренд: Bavaria Страницы: 29
Access Dinghy Access Liberty Owner'S Manual preview
Access Liberty
Бренд: Access Dinghy Страницы: 27
HonWave T20 Original Instructions Manual preview
T20
Бренд: HonWave Страницы: 38
Gumotex K2 User Manual preview
K2
Бренд: Gumotex Страницы: 44
BENETEAU OCEANIS 361 Owner'S Manual preview
OCEANIS 361
Бренд: BENETEAU Страницы: 35
Yamaha WaveRunner GP800R Service Manual preview
WaveRunner GP800R
Бренд: Yamaha Страницы: 247
Sailfish 316 DC Owner'S Manual preview
316 DC
Бренд: Sailfish Страницы: 68
Fassmer RR Series Operator'S Handbook Manual preview
RR Series
Бренд: Fassmer Страницы: 110
Jeanneau Cap Camarat 625 Manual preview
Cap Camarat 625
Бренд: Jeanneau Страницы: 54
Tayana VANCOUVER 42 Operation And Maintenance Manual preview
VANCOUVER 42
Бренд: Tayana Страницы: 70
LaserPerformance SUNFISH RACE Rigging Manual preview
SUNFISH RACE
Бренд: LaserPerformance Страницы: 9
Yamaha XLT800 WaveRunner 2004 Owner'S/Operator'S Manual preview
XLT800 WaveRunner 2004
Бренд: Yamaha Страницы: 136
Cobalt Digital Inc 262 Owner'S Manual preview
262
Бренд: Cobalt Digital Inc Страницы: 140
boAt Sun Marine Frp-330 Quick Start Manual preview
Sun Marine Frp-330
Бренд: boAt Страницы: 3
Seamax A Series Manual preview
A Series
Бренд: Seamax Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды