Hunter Marine 2006 H46, Руководство пользователя

Страница: 24 / 209

Climate Control System
____ Review and follow manufacturers manual for maintenance and up-keep
____ Seawater strainer water tight and clean
____ Seawater pump air purged and operational
____ Seawater flow adequate fwd and aft
____ Fwd system functions properly in all modes of operation
____ Aft system functions properly in all modes of operation
____ No seawater leaks in system components and lines
____ No condensation leaks to deck or liner
____ Air return/intake filters clean and clear
____ 110 or 220 VAC 30 amp shore power wired correctly at dock
____ Remote control units and display features operate correctly
____ Condensation drains open
Dockside Pre-sail inspection
____ Standing rigging tuned statically – all fittings pinned and secured (re-check after sailing)
____ Genoa installed and furling system operational
____ Main sail installed and operates smoothly
____ Main sail flaking system properly adjusted
____ All reefing points attained properly
____ Topping lift and outhaul operational
____ Sheets / Blocks / Winches operate correctly and easily under load
____ Genoa Car travels freely full length on tracks port and starboard
____ All line stoppers operational and labeled
____ Calibrate all electronic equipment and compass to geographical area.
____ VHF operational
____ Battery negative to keel ground voltage check. Mast and arch must be installed for this
check. This will verify no wires have shorted out to your keel/lighting ground system.
digital multimeter required
.
____ Dockside water connection operable and free of leaks
____ Complete safety package onboard and up-to date (see Chapman’s manual and US
Coast Guard rules and regulations)
____ Secure and evenly distribute all loose equipment and weight
____ Complementary onboard inspection made by local Power Squadron
Date of inspection: _____________________________
Inspection made by _____________________________
PAGE 11A- 8