Attach Accessories
Hold-Down Brackets
(Optional)
• Lower the shade and place the pins
from the hold-down brackets into the
bottom rail end caps.
• Mark the bracket hole locations.
• Check that the brackets are level and aligned. Attach using
two screws.
NOTE: If the hold down brackets are requested after initial
order, replacement end caps will accompany brackets.
Universal Cord Tensioner Installation
• Lower the shade.
• Hold the Tension Device upright.
• Position the Tension Device on the window
frame or the wall so that the Tension Device
and the control cord do not interfere with the
raising or lowering the shade.
DO NOT twist or cross the control cord.
• Holding the Tension Device upright, taught and in
position, insert and secure the screw into the hold.
NOTE: The mounting screw must be secured into a
solid surface. For additional instructions, see separate
universal cord tensioner installation instructions.
Cord Cleat Installation
• Attach the cord cleats 6" to 12" apart at a height
where they will be out of reach for children.
• Once the cleats are mounted, simply wrap the
excess cord around the cleats after each use of the
shade.
• Children may stand in or on furniture in an
attempt to reach loose cords. Please utilize child
safety hardware.
Valance Installation (Optional)
• Place the brackets over the
headrail so that the screws
align with the top groove
of the headrail.
• Align the valance fl ush with
the edges of the headrail.
• Using a Phillips screwdriver,
tighten all screws.
© 2005 Hunter Douglas Inc. ®
Registered trademark of Hunter Douglas Inc.
™Trademark of Hunter Douglas Inc. Patented in the U.S. and foreign countries.
U.S. and foreign patents pending.
LIT888219-B 10M- 06/05
Troubleshooting
7
PROBLEM SOLUTION
The shade does not raise
and lower evenly.
The shade will not raise.
If hold-down brackets are
used, make sure they have
been released.
Make sure the mounting
brackets are level and
aligned.
5
6
Care and Cleaning
Roman shades are made of anti-static, dust-resistant fabrics
which repel dirt and dust. For most fabrics, the following
options are available if your shade needs cleaning.
Dusting
Regular light dusting with a feather
duster is all the cleaning that is needed
in most circumstances.
Vacuuming
Use a hand-held vacuum with low
suction for more thorough dust removal.
Spot Cleaning
• Prepare a solution of warm water and mild dishwashing
detergent.
• Dampen a clean cloth in the solution and wring it out.
• Dab the spot with the dampened cloth until the spot is
gone. Do not rub the fabric.
• Allow the shade to dry in the completely lowered position.
For more comprehensive cleaning instructions, call the
Hunter Douglas Customer Information Center toll free at:
1-888-501-8364
