In addition, you will need fasteners designed to work with your
specifi c mounting surfaces:
Contents of your hardware package may vary depending upon
how the shade was ordered and whether the shade will be
mounted inside or outside the window opening.
Mount the Brackets
Bracket Requirements
Bracket Placement
• Bracket placement is the same for inside
and outside mounts.
• Measure 1
1
/
2
" in from the ends of
the headrail and mark the bracket
locations on the mounting surface.
• Space additional brackets evenly
between the end brackets.
• Adjust the bracket placement to
accommodate obstructions to the bottom
rail, such as window cranks or handles.
NOTE:
Do not mount brackets over
cordlock or support located in the standard
roman shade headrail or the top of the
clear plastic spool covers located in the
SoftGlide™ headrail.
Mounting Surface
Fastener
No. 6 Hex Head Screws
(Provided)
Drywall, Plaster
Wood
Wall Anchors, Expansion Bolts
(Not Provided)
Sheet Metal Screws
(Not Provided)
Metal
1
Space Evenly
Space Evenly
Installation Brackets
1 "
1
2
1 "
1
2
Spool
Cover
Headrail
Installation
Bracket
7
/
8
"
Minimum
Brackets Required*
Bracket Type
Hold-Down Bracket
(Optional)
2
Installation Bracket
End Mount Bracket
(Optional)
Extension Bracket
(Optional)
2
2
SOFTGLIDE™
Depth Chart For Bracket Placement
Minimum
Bracket Type
Fully Recessed
Inside Mount Applications
The depth required for an inside mount depends upon the
application.
• Center each bracket over a mark on
the mounting surface.
• Use a carpenter’s level to check that
the brackets are level and aligned.
Attach using two screws.
Outside Mount Applications
The minimum mounting height for
outside mounted shades is
7
/
8
".
• Center each bracket over a mark
on the mounting surface.
• Use a carpenter’s level to check
that the brackets are level and
aligned. Attach using two screws.
Extension Brackets (Optional)
Extension brackets project installation
brackets up to 1
3
/
4
" away from the
mounting surface. This allows for
additional clearance for obstructions
such as window cranks or handles.
• Use a carpenter’s level to check that
the extension brackets are level and
aligned. Attach using two screws.
• Attach the extension brackets to the top of the extension
bracket using machine screws and nuts.
NOTE: Attach each installation bracket to the same holes on
each extension bracket to ensure that the headrail is level.
End Mount Applications (Optional)
End mount the headrail when conventional mounting
techniques will not work.
End mounting is not recommended for shades wider than 48".
The minimum mounting height for end mounted shades is 1".
Bracket Placement
• Lower the shade completely and hold it in the window
opening at the ordered height.
• Keeping the headrail level, mark where the top of the
headrail is in the opening.
• Be sure that the marks on each side are at the same height.
See Chart
For Depth
STANDARD ROMAN
DO NOT MOUNT
BRACKETS NEAR
HARDWARE.
Cordlock
Roll
Support
Headrail
Installation
Bracket
18" to 36" 36
1
⁄
8
" to 72" 72
1
⁄
8
" to 96" 96
1
⁄
8
" to 120"
3
4
5
