2
1
click
2
1
3
Fix the outer bracket with the screws provided.
Install the main roller shade (without the end cap).
Use a pair of pliers to break off the stopper from the
bracket on the idle end side.
Slide the aligner or the connector through the brack-
et into the idle end.
Press the idle end, lift the roller shade and snap it
into the bracket.
Place the tube adapter on the aligner or connector
head.
Secure shade band by turning the locking ring
on tube bearing plug furthest away from the bracket.
Place the fascia in the bracket. Make sure that
the fascia slides under the nose of the bracket.
To align the bottom rails, push the shade against
the idle end (1), turn the shade, level the bottom rail
with the other one (2). Release to fix the position (3).
Not possible when using connector set.
To adjust skewing, put the provided Allen key into
the screw of the leveler and turn it left or right to
move the shade up and down. Support lifting of large
heavy roller shades with the palm of your hand.
Installation
Option: Leveler
7
