2
1
click
2
1
3
I
Install the outer bracket with the screws provided.
.
Use a pair of pliers to break off the stopper from the
intermediate bracket.
Slide the aligner or the connector set through the
intermediate bracket into the tube bearing plug.
Press the idle end, lift the roller shade and snap it
into the bracket.
Place the tube adapter on the aligner or connector
head.
Fix the roller shade by turning the locking ring
against the idle end.
Place the front profile in the bracket. Make sure that
the profile slides under the nose of the bracket.
To align the bottom rails, push the shade against
the idle end (1), turn the shade, level the bottom rail
with the other one (2). Release to fix the position (3).
Not possible when using connector set.
To adjust skewing, put the provided Allen key into
the screw of the leveller and turn it left or right to
move the shade up and down. Support lifting of large
heavy roller shades with the palm of your hand.
Option: Leveller
5
Installation: Coupled shade
