Hunter Douglas PowerView Motorization Скачать руководство пользователя страница 4

Страница: 4 / 24

GETTING STARTED

Thank you for purchasing Hunter Douglas Vignette

Modern Roman Shades Duolite

with

PowerView

Motorization. With proper installation, operation, and care, your new shades will

provide years of beauty and performance.

Please thoroughly review this instruction booklet and the enclosed packing list before beginning
the installation. For information regarding operation and programming, refer to the guide
included with your remote control.

Tools and Fasteners Needed

■

Flat blade and Phillips screwdrivers

■

Level (laser level is recommended)

■

Measuring tape and pencil

■

Power drill,

" drill bit, and

" hex driver

In addition, you will need fasteners designed to work with your specific mounting surface(s).

■

#6 Hex Head Screws (Provided).

Two 1

" screws are provided per installation bracket.

■

Longer Hex Head Screws (Not Provided).

If using spacer blocks, use #6 screws long

enough for a secure attachment.

■

Speed Nuts and Screws (Provided).

Extension brackets are supplied with screws and

speed nuts.

■

Drywall Anchors (Not Provided).

Use drywall anchors when mounting into drywall.

Speed Nut

and Screw

(Two Provided with

Each Extension Bracket)

#6 x 1

Hex Head Screw

(Provided)

Longer #6 Hex Head Screw

for Use with Spacer Blocks

(Not Provided)

Содержание PowerView Motorization

























Результаты поиска

Содержание PowerView Motorization

Отзывы:

Похожие инструкции для PowerView Motorization

Бренды по названию

Популярные бренды

Hunter Douglas PowerView Motorization, Установка Эксплуатация Уход

Результаты поиска

Содержание PowerView Motorization

Отзывы:

Похожие инструкции для PowerView Motorization

Бренды по названию

Популярные бренды