INSTALLATION
8
STEP 3 — Install the Shade
Install the Battery Wand Clips
Attach each battery wand clip to the rear of the headrail, avoiding the installation brackets.
NOTE:
The battery wand clips can simply slide to clear the installation brackets.
Mount the Headrail
CAUTION:
Be sure the cables do not become
pinched by the installation brackets when
mounting the headrail.
■
Peel back the protective covering from the
top of the fabric-covered headrail. Leave the
rest of the protective covering on the front
of the headrail.
■
Hold the headrail so the front (curved side)
faces you.
■
Push the top edge of the headrail into the
installation brackets.
■
Rotate the headrail and push back toward
the window until you hear an audible click.
The click indicates that the back edge of
the headrail is securely seated into the
bracket channel.
WARNING:
Failure to snap the
headrail securely into the installation
brackets may cause the shade to
release unexpectedly.
■
Gently pull on the front of the
headrail at each bracket to
ensure that the headrail is
locked into the brackets.
■
Completely remove the
protective covering from the
fabric-covered headrail by
peeling the covering all the way
to one end of the headrail.
3
Back of
Bracket
Headrail
Installation
Bracket
Fabric Guard
1
Front of
Bracket
2
Back of
Bracket
