Hunter Douglas LiteRise, Инструкция по установке и эксплуатации

Страница: 7 / 28

INSTALLATION
5
Width
of Blind
Number of
Brackets
Under
60 Sq. Ft.
Number of
Brackets
60 Sq. Ft.
and Over
Up to 60" 2 3
60
1
⁄
8
" – 120" 3 4
Over 120" 4 5
Mount the Hidden Installation Brackets
— Inside or Ceiling Mount (Residential Applications)
Bracket Shims (Optional)
Bracket shims are used to gain clearance for
inside or ceiling mount blinds.
NOTE:
Bracket shims may also be used
to level the blind whenever the mounting
surface is uneven.
Attach the Hidden Installation Brackets
■ ■
Mark 2" to 6" from each end of the headrail.
■ ➤
If more than two hidden installation brackets came with your order, space additional
hidden installation bracket(s) evenly between the two outer hidden installation
brackets and mark their location.
IMPORTANT: Do not position any hidden installation bracket where it will be located
directly above a cable tape ladder, cordlock, or wand tilter. Allow 1" space on each side
whenever possible.
■ ■
If the blind is larger than 60 square feet, position an extra hidden installation bracket at
the cordlock end for added support when raising the blind. With Two-On-One Headrail
blinds, position an extra hidden installation bracket near each cordlock.
■ ■
Center the hidden installation brackets on your marks and mark the location of the
screw holes.
■ ➤
The minimum casement depth
for mounting the hidden installation
brackets is
1
⁄
2
".
■ ➤
The minimum casement
depth for a fully recessed
mount is 1
5
⁄
8
".
■ ■
Drill the screw holes using
a
3
⁄
32
" drill bit.
2" to 6" 2" to 6" Space Evenly Space Evenly
Headrail
1
∕
2
" Minimum Depth
Hidden Installation
Bracket Attachment
1
5
∕
8
" Depth
Fully Recessed
Hidden
Installation
Bracket
Shim