INSTALLATION
6
■
■
Center the specialty brackets on your marks, then mark each of the screw holes.
■
➤
A minimum flat vertical surface of
5
⁄
8
" is required to mount the brackets.
■
➤
The top of the specialty brackets or extension brackets should be at the desired shade
height.
IMPORTANT:
The specialty brackets must be level and aligned to each other.
CAUTION:
The rear of the specialty brackets must be flush against a flat mounting
surface. Do not mount brackets on curved molding.
■
■
Drill the screw holes using a
3
⁄
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall.
■
■
Attach the specialty brackets or extension brackets at the top and bottom of the window
opening using the screws provided.
IMPORTANT:
The front edges of the specialty brackets must be level and aligned to
each other.
Extension
Bracket
Specialty
Bracket
