INSTALLATION
7
Magnetic Hold-Down Brackets
■
Lower the shade.
■
Place the magnetic hold-down bracket onto the bottom rail just
inside the end cap, oriented as shown.
■
Hold the bracket while opening and closing the shade slightly
(it may be necessary to have someone assist you). Adjust the
bracket to the best overall position using the mounting options
shown below.
■
Mark the screw location.
➤
The screw should be placed in the middle of the channel. This will allow for adjustment.
■
Drill the screw holes using a
3
/
32
" drill bit.
IMPORTANT:
Use drywall anchors when mounting into drywall.
■
Attach the hold-down brackets to the mounting surface using
the screws provided.
■
If necessary, adjust bracket height by loosening the screw and
sliding the bracket up or down.
Hold-Down
Bracket
Bottom
Rail
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Adjust bracket
using the
channel.
