Speed Dome Camera Instruction Manual
6/42
PTZ(Pan/Tilt/Zoom) Control
z
With RS-485 communication, max. 255 of cameras can be controlled at the same time.
z
Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware.
OSD(On Screen Display) Menu
z
OSD menu is provided to display the status of camera and to configure the functions interactively.
z
The information such as Camera ID, Pan/Tilt Angle, Alarm I/O and Preset can be displayed on
screen.
Alarm I/O Functions
z
4 alarm sensor Inputs and 2 alarm Output relays are available.
z
To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo
coupler and the relay is used for alarm output.
z
The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications.
Meanwhile, the maximum load of relay contact is AC 250V, 3A or DC 28V, 3A.
z
A camera can be set to move to a Preset position or to run functions such as Pattern, Swing and
Group when there are external sensor activations. Also “Post Alarm” function can be set, which is
supposed to activate after pre-defined time period and sequentially in succession to the action by
external sensor activation.
z
Meanwhile, the output relay can be matched to some specific Preset positions to do counteractions
such as turning on the light or sound the alarm.
Reserved Presets for Special Purpose
z
Most camera characteristics can be set up easily and directly with reserved preset, not entering
into OSD menu. For more information, refer to “Reserved Preset” in this manual.
Easy Installation and Perfect Outdoor Environment Compatibility
z
Fans and heaters are built-in in camera for cold and hot temperature environment. Also idealistic
mechanical design protects camera from water and dust.
z
It is easy to install and maintain camera with terminal for cable connection in brackets.
INTRODUCTION
1
