Speed Dome Camera Instruction Manual
32/42
Parking Action Setup
PARKING ACTION SETUP
------------------------
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
Alarm Input Setup
ALARM INPUT SETUP
------------------------
ALARM NO. 1
ACTION NOT USED
HOLD TIME ENDLESS
POST ACTION HOME
BACK
EXIT
HOW TO USE OSD MENU
4
If Park Enable is set to ON, camera runs assigned function
automatically if there is no PTZ command during assigned "Wait
Time".
z
Park Enable
[ON/OFF]
z
Wait Time
[1~59 sec/1~180 minute]
A camera automatically run a "Part Action" if there
is no command from controller for this time period.
z
Park Action
[HOME/PRESET/PATTERN/SWING/GROUP/PREV
ACTION]
Sets what a camera should do when there is no
command from a controller for the pre-defined time
period (
“
WAIT TIME
”
). If Park Action is set to
“
HOME
”
, the camera moves to the home position
which is memorized when the system boots. If Park
Action is set to
“
PREV. ACTION
”
, the camera
runs the previous action which it ran most recently.
z
Alarm No
[1~4]
Selects a sensor number to set up.
z
Action
[NOT USED/PRESET/PATTERN/SWING/GROUP]
Sets actions to run when sensor is input.
z
Hold Time
[ENDLESS/1~59 sec/1~180 minute]
Sets the time period for the action which is run by
external sensor activation. After the time period
passes, the action pre-defined in
“
Post Action
”
runs sequentially in succession to the action by
external sensor activation. If this option is set to
“
ENDLESS
”
,
“
Post Action
”
does not activate.
z
Post Action
[HOME/PRESET/PATTERN/SWING/GROUP/PREV
ACTION]
Sets the action that a camera should run after the
time period in
“
HOLD TIME
”
passes
