Huntcctv HTP-T13MG28D, Руководство пользователя

Страница: 10 / 33

HTP-T13MG28D User Manual
-9-
3. System Operation
1. Remote Video Monitoring
There are two ways to monitor video when the decoder site and HTP-T13MG28D are connected.
IP address should be correct, please refer to
True Manager Manual
and
Remote Setting in Chapter 5
for
further details.
„
Video Monitoring via Decoder System
Once the HTP-T13MG28D’s IP address is set in the remote IP address section of the decoder, the decoder
system will connect to the HTP-T13MG28D and start receiving the video images.
Normally, a monitor connected to the decoder will display video images.
„
Video Monitoring by Internet Explorer
If HTP-T13MG28D’s IP address is entered in to Internet Explorer, the system will ask for confirmation to install
Active-X control. Once authorized, Internet Explorer will start to display video images from the encoder as shown
below.
http://192.168.10.100
Default ID : admin Password : 1234