Hunt HNCA03-FE, Руководство пользователя

Страница: 55 / 85

User Manual of Network Fisheye Camera
54
Trigger one or more external alarm outputs when an event occurs.
Note:
To trigger an alarm output when an event occurs, please refer to
Section 5.6.4
to set the related parameters.
5.6.2 Configuring Video Tampering Alarm
Purpose:
You can configure the camera to trigger the alarm when the lens is covered and take
alarm response action.
Steps:
1. Enter the Tamper-proof Settings interface:
Configuration > Advanced Configuration > Events > Video Tampering
Figure 5-35 Tamper-proof Alarm
2. Check Enable Tamper-proof checkbox to enable the tamper-proof detection.
3. Set the tamper-proof area; refer to
Task 1 Set the Motion Detection Area
in
Section 5.6.1.
4. Click to edit the arming schedule for tamper-proof. The arming
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to
Task 2 Set the Arming Schedule for Motion Detection
in
Section