IMPORTANT SAFEGUARDS AND WARRANTY INFORMATION ________________________________________
Your Image
6100 Ultra laminator is designed to be one of the safest laminator on the market. Operational safety features have been
designed into your laminator with the user’s safety of utmost consideration. However, following safe operating guidelines is still the
responsibility of the operator.
n
Read, heed and follow these safety and operating instructions:
•
POWER
SOURCES
: Operate the laminator only with the type of power sources indicated in this manual. Refer to the Specifications
Table for the proper power requirements.
•
WATER
AND
MOISTURE
: Install a GFI breaker (RCD in Europe) if using the laminator near water or in an area of high humidity.
•
CLEANLINESS
: Use your laminator in the cleanest, most dust-free environment possible to produce the highest quality output.
•
SAFETY
: Keep hair, hands and clothing clear of the laminating roller openings at all times. Do not wear loose clothing, scarves, ties
and similar garments while operating the laminator.
•
PREVENTATIVE
MEASURES
: Do not feed objects such as staples, paper clips and rough or abrasive materials through the
laminating rollers. Keep all objects, such as tools, rulers, pens, markers or knives away from the roller opening. Refrain from leaving
such items on the front table to prevent them from accidentally being fed into the rollers.
*
IMPORTANT: NEVER
cut or slice directly on the rollers as any cuts or gouges will destroy them.
ALWAYS
use cutters with enclosed
blades to prevent cutting the rollers and to avoid extensive replacement costs.
þ
WARNING! Always adjust the shim wheels to create a gap between the laminating rollers to prevent flat spots from
developing when the laminator is not in use. Flat spots will affect the quality of the output and void the warranty
replacement.
þ
WARNING! Pull the front table away from the heated rollers when the laminator is not in use or when heating up the rollers.
Otherwise, the front edge of the table will become extremely hot and possibly warp the table. This will void the warranty
replacement.
•
SERVICING
AND
REPLACEMENT
PARTS
: Refer all servicing to an authorized service representative. Servicing by any unauthorized
technician voids the warranty. The service technician must use replacement parts specified by Hunt Graphics. Call Technical Service
for assistance (see the rear cover for the location nearest you.)
þ
IMPORTANT
: Service technicians must perform safety checks after completing any service or repairs to the laminator.
þ
WARNING!
The machines safety photo-eye system should be checked every 6 months (or after any internal adjustment /
repair) using a tool made from a piece of 12mm (1/2”) diameter wood or similar material. To test the photo-eye system, place
the tool on the table and slowly move it towards the rotating roller. The rotation must stop before the tool touches the roller
face. This test must be carried out across the whole width of the tables. If the photo-eye does not operate, switch off the
machine and do not use until it has been adjusted and checked by an authorized service technician.
Содержание Image 6100
