Hunt Electronic HVRM-T1600M, Инструкция по установке и эксплуатации

Страница: 41 / 138

Install&User Manual
４０
All sensor
It is used when setting for all sensors and set Off, or Normal Open (N.O.) / Normal Close
(N.C.) type.
(1)
Select All and set type.
Each sensor
It is used when setting for each sensor and set selecting each sensor.
(1)
Select sensor and press [Enter] button.
(2)
Select sensor that user want set and set type
(3)
Press [ESC] after finishing value setting.
2.3.3.2 Connecting relat and setting
Specification
In order to run relay output of DVR normally, the following conditions are required.
SPEC
Output Ch. 2EA relay outputs
Output type Dry contact
Connecting type Connect the trimmed wire to terminal block
Perfromance
DC 30V 1A
AC 125V 0.5A
Connecting relay out
Connect R1 ~ R2 with referring to the following images, it shows to connect a warning light.
Please refer the “Wire Handling”.