Hunt Electronic HVRM-T1600M, Инструкция по установке и эксплуатации

Страница: 39 / 138

Install&User Manual
３８
- Standard wire : Pie off the wiring cover 8~10mm and solder it. Wire gage should
AWG 22~26.
- Sold wire : Peel off the wiring cover 8~10mm and solder it.Wire gage should be AWG 20~26
2.3.2 Inserting & removing wire
To insert & remove wire in Terminal Block, use a screwdriver in the diagram to the below;
2.3.3 Connecting and configuring sensor
2.3.3.1 Specification
In order to run sensor input DVR normally, the following conditions are required.
Spec
Input Ch Transistor input
HVRM-T1600M. HVRM-T1600Q : 16EA,
HVRM-T800M, HVRM-T800Q : 8EA
HVRM-T400M : 4EA
Input type N.C, N.O supprt
Supported sensor Dry contact sensor
Way of connecting Connecting the trimmed wire to terminal block
Performance
Available input
pulse range
Minimum 500ms
Output current Typical DC 12mA