Hunt Electronic HVRM-T1600L, Инструкция по установке и эксплуатации

Страница: 28 / 133

Installaction & User Manual
28
NTP
(1) Select yes or no of using NTP.
(2) Select NTP mode among Client, server, Both using directional key. [
◀
/
▶
] or [▲/▼]
(3) Select Public or Both.
(4) Enter server IP address when configuring server type by Local.
(5) Configure communication interval with server.
DATE FORMAT
(1) Select “Date Format” using [
◀
/
▶
] or [▲/▼] arrow button and press [Enter] button. Select a
value using [
◀
/
▶
] arrow button from YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY.
(2) Press [ESC] after finishing value setting.
TIME
(1) Select “Time” using [
◀
/
▶
] or [▲/▼] arrow button and press [Enter] button.
(2) Select Date, Time using [
◀
/
▶
] arrow button and set value using [▲/▼] arrow button.
(3) Press [ESC] after finishing value setting..
APPLY
Most setting values are appled automatically, when exiting form the related menu page. But
“Date” & “Time” setting are not applied automatically because they may critically affect the file
system of the recorded HDD. To apply Date/ Time settings confirm with [Apply Date/Time]
buttons.
(1)
Select “Apply Date/ Time” using [
◀
/
▶
] or [▲/▼] arrow button and press [Enter]. Then, a
warning message will be appeared as below image;