Hunt Electronic HDR503 Series, Руководство пользователя

Страница: 21 / 58

20
4. In the list of IP Mode/URL Mode/DDNS Mode, select an item and click
Edit
to enter the following interface
to add a new input stream for decoding or edit the existed input stream by IP mode, URL mode or DDNS
mode.
Note:
Refer to
Chapter 4.1.2
for configuring the input stream assigned to the cycle decoding channel by IP
mode, URL mode or DDNS mode.
Figure 4.12 Edit Cycle Decoding of a Channel
5. Click
OK
to save the settings and back to the Cycle Decoding interface, or click
Back
to back to the Cycle
Decoding interface without saving.
6. Repeat Step4 and Step5 to edit other input streams for cycle decoding.
You can also click
Delete
to remove the configured input stream from the list.
Note:
Up to 64 input streams can be configured for each cycle decoding channel.
Figure 4.13 Configure Input Streams for Decoding
7. Click
Save
to save the configuration of input streams for the cycle decoding.
Example:
Configuration
: Decoding Channel: Channel 1, Cycle Time: 10 seconds, input streams configured for decoding: 10.
Result
: the video streams from these 10 input channels will be decoded by decoding channel 1 and displayed on
the screen in sequence with the duration of 10 seconds for each.
4.1.4 Configuring Video Wall Display
The HDR503-4 and HDR503-8 support the configuration for the multi-screen video wall display of the decoded
video.