Humminbird SINGLEBEAM 405SX, Руководство по эксплуатации

Страница: 27 / 35

MAINTENANCE
If you are using multiple transducers, switch between transducers to confirm
the connections for each.
Voltage Input. Another connection tested is the voltage input, and is
especially helpful in diagnosing input voltage problems. The current input
voltage is displayed. If voltage fluctuations or power supply in excess of 20
VDC or less than 10 VDC is suspected, use the diagnostic screen to confirm
input voltage. Often, small outboard motors do not effectively regulate
voltage when operated at high engine speeds.
Use Diagnostic while running the boat at high speeds to show the voltage
gain. Also, if you are using the
405SX in portable configuration or from the
trolling motor battery, Diagnostic can be used to evaluate the health of the
battery by showing the present voltage.
Total Time. The total time category indicates the total time the unit has
been in use since shipped from the factory. It is normal for some hours to
appear in the total time when the unit is new due to factory testing. While
this is often of interest to the user, it is primarily a diagnostic tool for the
repair technician should the unit need service.
MAINTENANCE
Your 405SX is designed to provide years of trouble free operation with virtually no
maintenance. Follow these simple procedures to ensure your 405SX continues to
deliver top performance.
• If the unit comes into contact with salt spray, simply wipe the affected
surfaces with a cloth dampened in fresh water. Do not use a chemical glass
cleaner on the lens. Chemicals in the solution may cause cracking in the lens
of the unit.
• When cleaning the LCD protective lens, use a chamois and non-abrasive,
mild cleaner. Do not wipe while dirt or grease is on the lens. Be careful to
avoid scratching the lens.
• If your boat remains in the water for long periods of time, algae and other
marine growth can reduce the effectiveness of the transducer. Periodically
clean the face of the transducer with liquid detergent. Pivoting the
transducer up in the bracket may allow better access for inspection or
cleaning.
25