Humminbird ProAngler, Руководство по эксплуатации

Страница: 30 / 33

To disable the Fish Alarm, press MENU until the Fish Alarm menu appears onscreen. Use the UP
ARROW to highlight "Off", and let the menu time out.
Triplog
Triplog provides a running log of information based on input from the
Temp/Speed sensor. Since Triplog requires information from the
Temp/Speed sensor to operate, if this sensor is not detected by the
ProAngler, the Triplog menu will not appear as an option.
To enable Triplog, press MENU repeatedly until the Triplog menu is on-
screen. The Factory Setting is "Hide" which is selected. Use the DOWN
ARROW to select "Show" and the fullscreen Triplog will appear.
Triplog provides seven pieces of information; the current digital depth, water surface temperature,
current boat speed, the distance traveled since the ProAngler was powered up or reset, the
average speed, the total time elapsed since power-up or reset, and the input voltage from your
boat's electrical system.
The time, speed, and distance calculations are useful for
tracking your progress on a trip. The input voltage is useful for
determining the condition of the charging system of the boat.
When used in a portable application or whenever the
ProAngler is operated from a battery source, the voltage
number can be used to determine battery life. The ProAngler
will operate at voltages from 10 to 20 VDC. Voltages in excess
of 20 or less than 10 VDC will cause the unit to power off.
Once Triplog is enabled, pressing MENU to bring the Triplog
menu onscreen now shows an additional option, "Reset". By
selecting Reset, the timer and distance log resets to 0 and the
Triplog will begin to calculate elapsed time, distance traveled,
and average speed from the time of reset.
To disable Triplog, press the MENU button until the Triplog
menu is on-screen. Use the UP ARROW to select Hide and let the menu time out. The Triplog
continues to operate and log time and distance even when it is not visible onscreen. The Triplog
resets at power off.
Options
The Options Menu is actually a series of linked menu functions which are
used initially to select user preferences. Once user preferences are
selected, it is unlikely that these functions need to be accessed during the
normal operation of the product.
The Options menu works differently than other menu functions in that all of
the options must be cycled through in order to return to normal operation. There are six Option
menus: Units, Fish ID, Numeral size, Bottom Black, Diagnostic and Reset.