Humminbird MEGA 360 ICE ADAPTER Скачать руководство пользователя страница 33

27

Specifications

ROHS STATEMENT: 

Product designed and intended as a fixed installation or part of a 

system in a vessel may be considered beyond the scope of Directive 2002/95/EC of the 
European Parliament and of the Council of 27 January 2003 on the restriction of the use of 
certain hazardous substances in electrical and electronic equipment.

ENVIRONMENTAL COMPLIANCE STATEMENT:

 It is the intention of Johnson Outdoors 

Marine Electronics, Inc. to be a responsible corporate citizen, operating in compliance with 
known and applicable environmental regulations, and a good neighbor in the communities 
where we make or sell our products.

WEEE DIRECTIVE:

 EU Directive 2002/96/EC “Waste of Electrical and Electronic Equipment 

Directive (WEEE)” impacts most distributors, sellers, and manufacturers of consumer 
electronics in the European Union. The WEEE Directive requires the producer of consumer 
electronics to take responsibility for the management of waste from their products to achieve 
environmentally responsible disposal during the product life cycle.

WEEE compliance may not be required in your location for electrical & electronic equipment 
(EEE), nor may it be required for EEE designed and intended as fixed or temporary installation 
in transportation vehicles such as automobiles, aircraft, and boats. In some European Union 
member states, these vehicles are considered outside of the scope of the Directive, and EEE 
for those applications can be considered excluded from the WEEE Directive requirement.

This symbol (WEEE wheelie bin) on product indicates the product must not be 
disposed of with other household refuse. It must be disposed of and collected for 
recycling and recovery of waste EEE. Johnson Outdoors Marine Electronics, Inc. will 
mark all EEE products in accordance with the WEEE Directive. It is our goal to 
comply in the collection, treatment, recovery, and environmentally sound disposal 

of those products; however, these requirements do vary within European Union member 
states. For more information about where you should dispose of your waste equipment for 
recycling and recovery and/or your European Union member state requirements, please 
contact your dealer or distributor from which your product was purchased.

Specifications

Operating Frequency ........................................................... 455 kHz / MEGA 

Area of Coverage ........................................ 455 kHz / MEGA: (2) 90° @ -10 dB 

Power Output .................................................................. 500 Watts (RMS), 

4000 Watts (Peak to Peak)   

Power Requirement ................................................................ 10 to 18 VDC 

Current Draw ....................................................................  0.5 A maximum 

Operating Temperature ....................................... -4°F to 158°F (-20°C to 70°C) 

Storage Temperature ....................................... -40°F to 158°F (-40°C to 70°C) 

 

NOTE:

 Humminbird verifies maximum stated depth in saltwater conditions, but 

actual depth performance may vary due to transducer installation, water type, thermal 
layers, bottom composition and slope.

NOTE:

 Product specifications and features are subject to change without notice.

Содержание MEGA 360 ICE ADAPTER



































Отзывы: