Humminbird LCR 4000 Скачать руководство пользователя | Manualshive

Страница: 14 / 38

background image

USING THE LCR 4000

INTRODUCTION

Before attempting to install or operate your Humminbird LCR, it is recommended that
you read the operations manual thoroughly. The LCR is a totally new concept in sonar
and has a number of special features not found on any other recorder. To completely
understand all the features of your unit, we suggest you follow the instructions set forth
in this manual. If after reading the instructions, there is something you do not completely
understand about the operations of your unit, we recommend you contact our customer
service department- CALL (334)687-0503.

INTRODUCTION

Congratulations on selecting the most advanced piece of sonar equipment ever
designed.

Your new Humminbird LCR



(Liquid Crystal Recorder) incorporates the most advanced,

innovative concepts in sonar equipment. The LCR is probably the most intelligent depth
sounder ever created. Advanced microcomputer technology is used to simplify its
operation, not complicate it, so you can quickly learn the basics of operating your unit.
After a couple of trips on the water, you will be operating your unit like an expert.

Your Humminbird LCR has a number of outstanding features including a unique
automatic feature. This computer controlled feature makes using your LCR as easy as
pushing the “On” button. The computer will automatically adjust the sensitivity, change
the depth scale even if the bottom goes off the screen and black out everything beneath
the bottom to make the display easy to read.

Other features include High Visibility LCD readout, night light, low profile swivel mount,
waterproof enclosure, four depth ranges beginning with a super-shallow 15 foot depth
range, digital bottom reading, and more.

Read this operations manual thoroughly for all the outstanding features of your LCR.
You will be amazed at its capabilities.

Since there are virtually no moving parts, your LCR will function more trouble free than
any sonar unit you have ever owned.

This unit has been engineered, tested, manufactured, and is guaranteed by the
employee/owners of Techsonic Industries, located on the shores of Lake Eufaula,
Alabama.

Fishing, boating, and depth sounders are our business, and at Humminbird we stand
behind our product 100%.

«
...
12
13
14
15
16
...
»

Содержание LCR 4000







































Отзывы:

Нет отзывов

Похожие инструкции для LCR 4000

Бренд: Humminbird Страницы: 19

Бренд: Garmin Страницы: 52

PORTABLE ICE FISHING KIT

Бренд: Garmin Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды