background image

MAINTENANCE AND WARRANTY 

SERVICE POLICY 

 
SERVICE POLICY

 

 

This Service Policy is valid in the United States only. This applies to Humminbird units 
returned to our factory in Eufaula, Alabama, and is subject to change without notice. 

 
All repair work is performed by factory-trained technicians to meet exacting factory 
specifications. Factory serviced units go through the same rigorous testing and quality 
control inspection as new production units. 
 
Even though you'll probably never need to take advantage of our incredible service 
guarantee, it’s good to know that we back our unit this well. We do it because you 
deserve the best. We will make every effort to repair your unit within three working days 
from the receipt of your unit. This does not include shipping time to and from our factory. 
Units received on Friday are usually shipped by Wednesday, units received Monday are 
usually shipped by Thursday, etc. 
 
We reserve the right to deem any product unserviceable when replacement parts are no 
longer reasonably available or impossible to obtain. 
 
After the original warranty period, a standard flat rate service charge will be assessed 
for each repair (physical damage and missing parts are not included). Please call our 
Customer Support Department to verify the service charge for your unit. 
 
The standard service charge includes UPS or Parcel Post freight only. If charges are 
not prepaid, the unit will be returned COD. If you are experiencing problems related to 
bottom or depth readings please send your transducer along with your unit when 
sending for repair. 
 

Содержание LCR 400 ID





























Отзывы: