background image

BEFORE BEGINNING 

THE HUMMINBIRD ADVANTAGE 

 
THE HUMMINBIRD ADVANTAGE 

 
The LCR 400ID incorporates the best of available technologies, and offers advantages 
you won’t find in other depth sounders. 
 
The liquid crystal display (LCD) offers sharp viewing even in bright, direct sunlight, and 
is continuously lit for nighttime operation. Advanced LCD “super-twist” technology built 
into the LCR 400ID offers a wider viewing angle and higher contrast than ordinary LCD 
screens. 
 
(You will notice that the display can be seen better at certain angles. The gimbal 
mounting bracket lets you easily adjust the viewing angle for optimum viewing. Note 
also that some polarized glasses can affect your viewing by causing a rainbow or prism 
to appear; if so, tilt the unit slightly.) 
 
Though it includes sophisticated electronics, the LCR 400ID is tough enough to take the 
pounding punishment of rough seas or a race across the lake. Completely waterproof – 
even saltwater-proof – your LCR 400ID will provide you with many years of thoroughly 
reliable operation. 
 
In the unlikely event that your Humminbird does require repairs, we offer an exclusive 
Service Guarantee – free of charge during the first year after purchase, and available at 
a reasonable rate after the one-year warranty period. Complete details are included in 
this manual. 

Содержание LCR 400 ID





























Отзывы: