background image

 

 

 
THE HUMMINBIRD ADVANTAGE 

 
The LCR 3D incorporates the best of available technologies, and offers advantages you won't 
find in other equipment. Three different view options, along with individual beam control, provide 
a wide array of viewing options. 
 
The liquid crystal display (LCD) offers sharp viewing even in bright, direct sunlight, and offers 
lighting for night operation. Advanced LCD "super-twist" technology built into the LCR 3D offers a 
wider viewing angle and higher contrast than ordinary LCD screens. Contrast can also be 
manually adjusted for optimum viewing. 
 
(Note that some polarized glasses can affect your view by causing a rainbow or prism to appear If 
so, tilt the unit slightly, or manually adjust contrast as described in this manual.) 
 
Though it includes sophisticated electronics, the LCR 3D is tough enough to take the pounding 
punishment of rough seas or a race across the lake. 
 
Completely waterproof - even saltwater-proof your LCR 3D will provide you with many years of 
thoroughly reliable operation. 
 
In the unlikely event that your Humminbird does require repairs, we offer an exclusive Service 
Guarantee - free of charge during the first year after your purchase, and available at a reasonable 
rate after the one-year warranty period. Complete details are provided at the end of this manual. 
 
 

WHAT YOU HAVE 

 
Before installing your new LCR 3D, please ensure that the following parts are all included in the 
product box: 
 

Item                    Part No. 
LCR 3D depth sounder 

LCR 3D 

Sensor with 20' cable 

SHS-9 

Gimbal mounting bracket G-LCR-P 
48" power cable 

      PC-10 

Mounting knobs 

      MKH-LCR 

Hole cover              HC

 

 

Содержание LCR 3D




























Отзывы: