3.
Connecting the Transducer Cable
This section covers how to connect your transducer cable to your control head.
NOTE:
If you have an ICE 55 Flasher, remove the control head and base from the portable
bag first.
1. Insert the transducer cable into the appropriate terminal slot on the rear of the
control head.
NOTE:
The slots are keyed to prevent reversed installation, so be careful not to force the
connector onto the holder.
2. Route the transducer signal cable beneath the control head and secure to cable
clips on the base.
3. Reinstall assembled control head, base, and transducer into portable bag
(ICE 55 only).
Connecting to the ICE Flasher Series™ Fishfinder
Transducer
Signal Cable
Cable
Clips
14
Содержание ICE Flasher 55
Страница 1: ...ICE 35 ICE 45 ICE 55 Installation and Operations Manual 531611 1_A...
Страница 43: ...39 NOTES...