4
Set the Water Level Offset
It is important to note if the water level is higher or lower than normal
for the selected lake.
For example, if the water level is down 3 feet, set the
Water Level Offset to -3. Depth labels on the Contour Lines will adjust
based on the Water Level Offset setting.
•
If the water level is higher than normal,
set a positive amount.
•
If the water level is lower than normal,
set a negative amount.
•
If the water level has not changed (normal):
For APEX and SOLIX,
turn Water Level Offset off. For HELIX, set the Water Level Offset
to 0.
APEX/SOLIX:
Home > Settings > Chart > Water Level Offset
HELIX:
Main Menu > HB Chart tab > Water Level Offset
water level offset (off)
water level offset (on)
shoreline
new shoreline with Water Level Offset set to -3
Set Safe Depth Level
Use the Safe Depth feature to set the minimum depth level for your
vessel and to turn on highlights for hazards shallower than that level.
APEX/SOLIX:
Home > Settings > Chart > Safe Depth
HELIX:
Main Menu > HB Chart tab > Safe Depth
