Humminbird 777c2 Скачать руководство пользователя страница 36

Страница: 36 / 42

Wireless Sonar Link (WSL):

Purchase the Wireless Sonar Link (WSL) accessory to

receive remote sonar signals from a SmartCast® Remote Sonar Sensor (RSS). Radio
signals from the RSS are received by the WSL and transmitted over the Accessory Bus
to the 700 Series™ Fishing System.

PC Connect Cable:

Purchase the PC Connect Cable to connect the 700 Series™ Fishing

System to a PC in order to upload product software updates and new features
obtained from

www.humminbird.com

. This accessory requires the MSWindows-

compatible HumminbirdPC™ software downloaded from our website to your PC in
order to communicate with the 700 Series™ Fishing System.

Be sure to check out our website

www.humminbird.com

for additional new and

exciting accessories to grow your 700 Series™ Fishing System!

NOTE:

Each accessory requires a separate purchase. You can visit our website at

www.humminbird.com

or contact our Customer Resource Center at 1-800-633-1468 for

additional details.

Specifications

Depth Capability

........................................................................................ 1500 ft (450 m)

Power Output

.................................................... 500 Watts (RMS), 4000 Watts (Peak to Peak)

Operating Frequency

...................................... 200 kHz and 83 kHz DualBeam PLUS™

Area of Coverage

.......................................................................... 60° @ -10 dB in 83 kHz

20° @ -10 dB in 200 kHz

Target Separation

........................................................................ 2 1/2 Inches (63.5 mm)

Power Requirement

............................................................................................ 10-20 VDC

LCD Matrix

...................................................................................................... 640 V x 480 H

Transducer

............................................................................................................ XHS-9-20-T

Transducer Cable Length

.................................................................................. 20 ft (6 m)

Current Draw

.......................................................................................................... 0.7 Amps

NOTE:

Humminbird® verifies maximum stated depth in saltwater conditions, but actual

depth performance may vary due to transducer installation, water type, thermal layers,
bottom composition and slope.

NOTE:

Product specifications and features are subject to change without notice.

531474-1_A_777c2_English.qxd 11/3/2005 8:02 PM Page 70

Содержание 777c2











































Результаты поиска

Содержание 777c2

Отзывы:

Похожие инструкции для 777c2

Бренды по названию

Популярные бренды

Humminbird 777c2, Руководство по эксплуатации

Результаты поиска

Содержание 777c2

Отзывы:

Похожие инструкции для 777c2

Бренды по названию

Популярные бренды