manualshive.com logo in svg

Humminbird 717, Руководство по эксплуатации


Поделиться
Скачать
background image

77

*NMEA 0183 is a National Marine Electronics Association standard for data communication.

Wireless Sonar Link (WSL)

purchase the Wireless Sonar Link (WSL) accessory to

receive remote sonar signals from a SmartCast® Remote Sonar Sensor (RSS).
Radio signals from the RSS are received by the WSL and transmitted over the
Accessory Bus to the 700 Series™ Fishing System.

PC Connect Cable:

Purchase the PC Connect Cable to connect the 700 Series™

Fishing System to a PC in order to upload product software updates and new
features obtained from 

www.humminbird.com.

This accessory requires the

MSWindows-compatible HumminbirdPC™ software downloaded from our
website to your PC in order to communicate with the 700 Series™ Fishing System. 

Universal Sonar 2:

Your 700 Series™ Fishing System supports Universal Sonar

2, a state-of-the-art, integrated and protected transducer that is built into the
lower unit of Minnkota trolling motors. With Universal Sonar 2, all wiring is
concealed inside the indestructible composite shaft—out of sight and out of
harm’s way, with no clamps, ties, or exposed wires. Universal Sonar 2 features
new temperature sensing and the performance of DualBeam PLUS™
technology (available with all Humminbird® DualBeam PLUS™ models). An
expanded view and greater bottom detail gives you a totally new perspective of
the water below, along with optimal sonar performance to help you find fish.

Downriggers are the key to catching fish you otherwise couldn’t even touch. And
now Humminbird’s 

CannonLink™

Downrigger Controller makes operation of up to

six Cannon™ Mag 20 DT or Mag 20 DT/HS downriggers incredibly easy. Using the
controls on your Fishing System, deploy or retrieve downriggers, hold a specific
distance off the bottom, cycle downriggers between two depths, and adjust the
Positive Ion Control. Even see temperature and water clarity at depth and speed at
the ball right on-screen when using the Cannon™ Speed-n-Temp. You’ll never be
shorthanded again, just make adjustments from the helm, while your mate rigs the
lines and brings in the fish!

With the new 

InterLink™

Network Connection, you can now share GPS

position, waypoints, routes and your current track between two Humminbird
Fishing Systems in real time. Mark a waypoint at the console, and it’s instantly

531524-1_A - 717 & 727 Man_Eng.qxp  9/30/2006  7:24 PM  Page 82

Содержание 717

































































































Отзывы:

Нет отзывов

Похожие инструкции для 717

Garmin Fishfinder 140 Owner'S Manual preview
Fishfinder 140
Бренд: Garmin Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды