Humminbird 581i DI Combo Скачать руководство пользователя страница 105

Страница: 105 / 140

Waypoint Settings

Settings: Press the RIGHT Cursor key to open the dialog box.

Waypoint Settings

allows you to open the Waypoint Settings dialog box. Use

the Waypoint Settings dialog box to set the waypoint icon category and the
waypoint icon for all new waypoints. See

Introduction to Navigation: Edit your

Waypoints, Routes, Tracks, and Groups

and the Humminbird® Waypoint

Management Guide for details.

The Waypoint Settings dialog box includes the following options:

Icon Category

allows you to select a waypoint icon category (All,

Geometry, Alerts, Supplies, Navigation, Recreation, Fish, Environment).
The Default Waypoint Icon also changes to match the selected category.

Default Waypoint Icon

allows you select an icon for all new waypoints.

To see the most icon choices, set the Icon Category to All.

New Waypoint Icon:

Select

Default

, and the system will automatically apply your

settings to new waypoints.

If you choose

Select

, each time you mark a waypoint (by pressing

the MARK key), you will be prompted to change the waypoint icon
and category. To accept the current settings, press the MARK key
again.

Saved Tracks Defaults

Settings: Press the RIGHT Cursor key to open the dialog box.

Saved Tracks Defaults

allows you to open the Default Track dialog box. Use the

dialog box to set the default track appearance for all newly-saved tracks.

The Saved Tracks dialog box includes the following options:

Visibility

allows you to set new tracks to visible or hidden.

Style

allows you to set the appearance and color of new tracks

(Breadcrumb Trail, Dashed Line, Solid Line or Wide Line, and if a line,
the grayscale color of the line).

Navigation Menu Tab

Содержание 581i DI Combo













































































































































Результаты поиска

Содержание 581i DI Combo

Отзывы:

Похожие инструкции для 581i DI Combo

Бренды по названию

Популярные бренды

Humminbird 581i DI Combo, Руководство по эксплуатации

Результаты поиска

Содержание 581i DI Combo

Отзывы:

Похожие инструкции для 581i DI Combo

Бренды по названию

Популярные бренды