eight seconds have played. If the CD
player on the front radio is in use, you
cannot seek different tracks.
PROG (Program): The front passengers
must be listening to something different
for each of these functions to work:
• Press this button to go to the preset
radio stations set on the pushbuttons
on the main radio.
• When a cassette tape is playing,
press this button to go to the other
side of the tape.
• When a CD is playing in the radio,
press this button to go back to the
beginning of the CD.
• When a CD is playing in the CD
changer, press this button to select
the next CD.
See Section 3 of your Owner Manual.
Getting to Know Your H2
8
Rear Seat Audio (RSA)
The following functions are controlled by
the RSA system buttons:
(Power): Press this button to turn the
Rear Seat Audio system on or off. You
may operate the Rear Seat Audio
functions even when the primary radio
power is off.
(Volume): Turn this knob to increase
or decrease volume. The left knob con-
trols the left headphone and the right
knob controls the right headphone.
SRC (Source): Press this button to
select an audio source: radio, cassette
tapes, CDs, or DVDs, depending on
your vehicle’s options.
(SEEK): While listening to FM1,
FM2, or AM, press the up or down arrow
to tune to the next or previous station
and stay there. If the front radio is in
use, you cannot seek different stations.
While listening to a cassette tape, press
the up or down arrow to hear the next or
previous selection. If the cassette tape
on the front radio is in use, you cannot
seek different selections on a tape.
While listening to a CD, press the up
arrow to hear the next track on the CD.
Press the down arrow to go back to the
start of the current track if more than
Navigation Radio (if equipped)
Set a station preset
1. Turn the radio on by pressing the
VOL (power) button.
2. Push the BAND button to select the
desired band.
3. Use either the TUNE knob or the
SEEK rocker to tune to a station.
