Getting to Know Your H2
10
HomeLink
®
Transmitter
Program HomeLink
1. Determine which of the three chan-
nels (buttons) you want to program:
garage door opener, gate opener,
entry door locks or other.
2. Press and hold the desired HomeLink
button through step 3.
3. When the HomeLink light blinks slow-
ly (within 30 seconds), hold your
transmitter/opener 1” to 3” away from
Steering Wheel Controls
(OnStar/Voice Recognition)
(if equipped): This button will activate
OnStar
®
for use. (Note: If your vehicle is
not equipped with OnStar
®
, pressing this
button will mute the radio.)
contrast of the main screen. You
can also override the vehicle
selection of day or night screen
mode and change the vehicle chime
volume.
• Another useful feature allows you to
add several common or planned
destinations as memory points from
the NAV menu. Then when you wish
to navigate to one of these points you
can simply select it as a memory
point from the destination entry
screen.
• A scroll bar on the left part of the
screen indicates that there are more
items that can be displayed by
pressing the page up/down or line
up/down arrows.
See your Navigation Radio supplement for
more information.
the HomeLink buttons. Then hold
your transmitter button on until the
HomeLink light flashes rapidly (up to
90 seconds). The process is now
complete.
See Section 2 of your Owner Manual.
Note: If your transmitter has a “rolling
code” feature, this process may not
work. Please refer to your Owner
Manual or contact HomeLink at
1-800-355-3515 (www.homelink.com).
