humimeter BMA-2 Operating Manual
Page 18
4. Keep
or
pressed to scroll through the types and confirm by pressing
.
5. Press
to start the measurement.
»
The LED is blinking in blue during the entire mea-
surement.
»
The display shows the active measurement process
(figure
14
).
»
After completion of the measurement, the LED is
shining in blue.
»
The display now shows the measured values
(figure
15
).
»
The displayed value flashes when the moisture
content exceeds the measuring range of the selec-
ted product type. A flashing value signals lowered accuracy of the measurement.
The measuring range limit of the wood chip calibration curves is 60 % moisture
content.
6. Once the reading has been taken, it can be saved on the device (see
"5.3 Saving
individual readings"
or
"5.4 Saving several readings (a measurement series) at the
same time"
).
7. Open the drawer and carefully remove the measuring chamber.
8. Empty the measuring chamber completely.
i
Information - Measuring accuracy
To increase the measuring accuracy, take three measurements of the same
material. When saving the individual readings, the device will automatically cal-
culate the readings’ average (see
"5.4 Saving several readings (a measurement
series) at the same time"
).
i
Information - Incorrect readings
Always make sure to select the correct product type for the material you are
measuring. This prevents taking incorrect readings (see
"11. Faults"
).
14
15
Содержание BMA-2
