Page 15
4.
Using the device - Basics
4.1
Inserting the measuring chamber
1. Open the drawer of the device by lift-
ing and pulling the handle towards you
(figure
1
).
2. Hang the empty measuring chamber in
the drawer.
»
The handle and the suspension of the
measuring chamber must hang in the
plastic brackets of the drawer (figure
2
).
3. Close the drawer. If necessary, push its handle downwards to fully close it.
4.2
Plugging in the device
1. Make sure that the socket you want to use has the
same electrical voltage as described on the name plate
of the power supply unit.
2. Plug the power cable into the device (figure
3
).
3. Plug the power cable into the power socket.
4.3
Switching the device on
»
After plugging in the power cable, the device
switches on automatically
Or
• Press
for 3 seconds.
»
The display will then show the status indicator
humimeter
(figure
4
).
1
2
3
4
Содержание BMA-2
