background image

 

Humidex 

11 

 

Unit Operations 

How a Humidex Work 

Humidex is a mechanical ventilation appliance installed in the 

lowest 

level of a home, (basement or 

crawlspace), engineered to expel moisture-laden air that stagnates due to poor air circulation. Cool, 

moist air will gravitate to the lowest point of the home, which is the basement in a multi-level home 

and where it can condense on the cooler floor/wall surfaces. The lack of proper ventilation in the 

basement  creates an environment where the damp air will stagnate and emit odors, nurture the 

development of molds, mildew and saturate into the structure, i.e. walls, floors, frame works, 

drywall, as well as contents. 

A quiet powerful fan in the unit draws the moist surface air in through the bottom vents and then 

expels it 

out of the house through a 6 inch duct. 

The expelled air is replaced with a flow of fresh, 

dry, warmer replenishment air drawn downward from the upper level, which raises the temperature 

and lowers the relative humidity. The humidistat control in the unit measures the relative humidity 

of the air flowing out. When the humidity drops to below the set level, the unit will decrease the 

flow of air to a minimum. 

 

The air flow will draw in the surface moisture and effectively “dry out” the structure. This decreases 

mildew and mold activity by not allowing the moist air to stagnate and nurture their growth. 

In the summer, with air conditioning running the replenishment air is dehumidified which will assist 

in lowering the relative humidity and in the drying out process. 

When there is no air conditioning, the air upstairs is warmer and will raise the dew point downstairs 

as it eventually warms the basement to reduce condensation.  

In the winter, the air upstairs flows downstairs,  this is then replaced by dryer outside air, thus 

reducing window condensation and lowering the humidity upstairs. The warmer replenishment air 

will raise the downstairs temperature. The heat in the house accompanied with the dry air (Dryer air 

requires less energy to heat) will result in the Humidex working at a low speed; enough to maintain a 

minimal airflow with minimal energy costs. 

The air that flows downstairs is replaced with air that seeps into the house through openings or 

building air leakage. The direct effect of the air being expelled and the flow of the air downstairs 

create  an air exchange in the house several times a day, expelling gases, toxins and contaminants 

trapped in the air and providing fresh clean air necessary for good indoor air quality. 

In this manner, Humidex helps control the relative humidity level in the home, reduces moisture 

related problems and provides recommended air exchanges for a healthy, drier home environment. 

Vacant Homes  

Performance results are maximized when the building is occupied. If home is vacant for a prolonged 

period of time, then the unit should be set to operate at low speed. A fresh air intake supply is 

recommended via a small opening in a window upstairs or a supply vent such as the ASV-90. 

Содержание HDS-103


















Отзывы: