background image

Mortar Penetration Resistance Apparatus (H-4137) 

                     

                                   Page 4 of 6 

Instruction Manual          Rev.0; August 14, 2003

 

Copyright 2003 Humboldt Mfg. Co., Norridge, IL. 60706, U.S.A. 

All rights reserved. Printed in U.S.A.

 

6.3 Insert a needle of appropriate size in the apparatus and bring the bearing surface 

of the needle into contact with the mortar surface. Gradually and uniformly apply 
a vertical force downward on the apparatus until the needle penetrates the mortar 
to a depth of 1 inch (25mm) as indicated by the scribe mark read at top of slide. 
The time required to penetrate to the scribe mark shall be approximately 10 
seconds. Record the force required and time of application, measured as elapsed 
time after initial contact. In subsequent penetration tests, avoid areas where 
mortar has been disturbed by previous tests. Distance between impressions 
should be at least two (2) diameters of the needle used, but not less than  ½ ”  
(13mm) and at least 1” (25mm) from the side of the container being used. 

6.4 Make penetration tests at hourly intervals for normal mixtures and normal 

temperatures. The initial test being made after an elapsed time of 3 to 4 hours. In 
some instances, the initial elapsed test times maybe increased or decreased. 

 

6.5 Not less than six (6) penetration determinations should be made in each rate of 

hardening test. The time intervals between penetrations resistance determinations 
shall be such as to give a satisfactory rate of hardening curve. Continue test until 
one penetration resistance of at least 4,000 psi (27.6 mpa) is reached. 

 

7. Calculation 

 

Calculate the penetration resistance, in pounds per square inch, or mega Pascal, as the 
force required to cause a 1" (25mm) depth of penetration of the needle divided by the 
area of the bearing face of the needle. 
 

8. Replacement Needles 

 
     Needle Size 
 
 Model No.    Square Inch    Square MM

 

  
 H-4143.1 1 645  
 H-4143.50 ½ 323 
 H-4143.25 ¼ 161 
 H-4143.10 1/10 65 
 H-4143.05 1/20 32 
 H-4143.025 1/40 16   

 
 
 
 
 
 
 
 
 

Содержание H-4137







Отзывы: