10
Version 2019/01
FTK Operating Instruction Manual (Part 2)
Setting the track width
min.
max.
Drive-up ramps positioned at track width
►
►
Adjust the drive-up ramps to the track width of the vehi-
cle to be loaded.
Make sure that the drive-up ramps are supported /
engaged on the chassis edge.
Drive-up ramp engaged
6.4 Positioning the drive-up ramps
Crush hazard!
Fingers / hands can be injured when removing
and positioning the drive-up ramps.
►
►
Remove and position the drive-up ramps carefully. Hold
theme at the sides.
►
►
Keep your fingers away from the crush areas.
►
►
Wear
.
Sharp edges!
Fingers / hands can be cut on sharp edges
when removing and positioning the drive-up
ramps.
►
►
Wear
.
Removing the drive-up ramps
4
1
3
2
Unlocking the interlocks
Pulling out the drive-up ramps
1. Drive-up ramps
2. Interlocking plate
3. Drive up ramp lock
4. Chassis edge
Position the drive-up ramps one after the other.
►
►
Unlock the interlock - fix it in place.
►
►
Carefully pull out the drive-up ramp.
►
►
Place the drive-up ramp on the edge of the chassis.
CAUTION
