background image

Cleaning / care

7

94

Testing, care and maintenance

MACHT’S MÖGLICH

Ventilating / drying the inside

Fig. 28

Ventilating the trailer / drying it out

1

Vent window

2

Skylight

3

Doors

Mould and moisture damage can be prevented by 
adequately ventilating the interior.

Allow the interior of the trailer to dry thoroughly after 
cleaning.

Open any openings such as vent windows 
(Fig. 28 /1), skylights (Fig. 28 /2), doors (Fig. 28 /3) and 
the tailgate if necessary.

Remove any standing water with a broom and cloth.

Cleaning utensils

Fig. 29

Cleaning utensils

1

Holder

2

Broom

3

Shovel

4

Shovel handle

5

Shovel connection

6

Shovel extension

The saddle compartment contains a shovel and broom for 
cleaning the trailer.
If necessary, the shovel elements can be assembled.
The shovel can be used to collect horse droppings.

Insert the shovel handle (Fig. 29 /4) into the shovel 
connection (Fig. 29 /5).
- The shovel handle clicks in place.

Insert the shovel extension (Fig. 29 /6) into the shovel 
connection with the shovel handle.

Fig. 30

Adjusting the broom height

1

Broom (parking position)

2

Broom (working position)

Unscrew the holder at the bottom.

Slide the rods until the required length is achieved.

Fasten the rods by screwing.

Fig. 31

Cleaning the tailgate / cargo bed

Carefully clean the cargo bed / tailgate.

W - 028

2

1

3

W - 029 

1

2

3

4

5

6

W - 030 

1

2

W - 031

Содержание 7000 Series





































































































Отзывы: