manualshive.com logo in svg

Humbaur 4000 Series, Руководство по эксплуатации, Страница: 24 / 26

Поделиться
Скачать
Humbaur 4000 Series Скачать руководство пользователя страница 24

24  

 

Version 2019/01  

 

           

 

Operating Instruction Manual HKT (Part 2)

10 

Troubleshooting

Use the fault rectification table to repair the 
specific operating functions of the HKT trailer in 
the event of a fault.  

For further causes of faults and rectification measures,  
see the operating instruction manual  
"Trailers up to 3.5 to (General Points - Part 1)".

 

Unsecured trailer!

Unexpected start!

Do not go under the chassis when trouble- 
shooting. There is a danger of you being  
crushed if the trailer starts to move  
unexpectedly. 

►

►

Make sure that the trailer is secured so that it cannot  

 

roll away.

►

►

Do not actuate the cargo bed whilst you or anyone  

 

else are under the chassis.

Malfunction

Possible cause

Solution

Cargo bed does not lower.

- The locking lever does not release.

- The locking mechanism is maladjusted.

 

 Move the cargo bed to its top position until the  

    locking lever can be moved.

 Adjust the tensioning cables of the locking  

    mechanism.

- The coupling height of the towing vehicle is  

  too low (< 410 mm).

 Check the coupling height of the towing vehicle. 

 Adjust the required height or exchange the towing  

    vehicle for one with a suitable coupling height.

Cargo bed does not rise up.

- The valve wheel of the hydraulic pump is open.

 Close the valve wheel of the hydraulic pump.

 Lift the cargo bed.

Mudguards not properly 

positioned - jammed.

- The attachment angle is wrong and the  

  positioning bolt is maladjusted. 

 

- The positioning bolt is deformed.

 

Check the position of the attachment brackets  

    with positioning holes and adjust where necessary. 

 

Exchange the positioning bolt.

Fault repair table

 

 

WARNING

11 

Decommissioning/disposing of the trailer

Observe the safety instructions for decommissioning 
/ disposal of trailers in the operating instruction 
manual, "Trailers up to 3.5 to"  

 

(General Points - Part 1).

11.1 Decommissioning the trailer

►

►

Secure your trailer against unauthorised use by third  

 

parties, e.g. using wheel clamps.

►

►

Park your trailer so that it cannot cause any further  

 

hazards for third parties, e.g. by tipping over, rolling  

 

away, or causing a traffic obstruction.

11.2 Disposal

►

►

Take the individual parts or the entire trailer to a car/ 

 

vehicle recycling facility.  

 

The specialists at the car/vehicle recycling facility will  

 

dispose of the individual components in the proper  

 manner.

Содержание 4000 Series



























Отзывы:

Нет отзывов