Humbaur 3000 Series, Руководство по эксплуатации

Страница: 75 / 106

5
H-frame (optional)
73
MACHT’S MÖGLICH
Load securing / Operating the body
Handling the H-frame
Fig. 69 H-frame mounted
1 H-frame (screwed)
2 Stanchion
Instructions for fitting / removing the
H-frame are provided in the operating instruction
manual "Trailers up to 3.5 to / Part 1 - General”.
The H-frame is used for transporting and securing long load
materials.
The H-frame (Fig. 69 /1) is inserted in the front stanchions
(Fig. 69 /2) and screwed in place.
Securing a load
Fig. 70 Load securing with H-frame
1 Load
2 Tension belt
3 Tie-down point
4 Securing the loading unit
Long loads must be secured as individual loading
units.
Driving with loose loads on the
H-frame is prohibited.
The loading unit can also be tied down to the H-
frame
 Use tension belts to tie down the load (Fig. 70 /1) to form
an individual loading unit (Fig. 70 /4).

Tie down the loading unit
(Fig. 70 /2) at the tie-down points (Fig. 69 /3) with
tension belts.
- Ensure that the load cannot slide and is safely
positioned / distributed.
A - 061
1
2
A - 062
1
2
4
3